專題文章組合型板式熱交換器：自由流體設計
542
次閱讀
次閱讀
專有的自由流體設計
其他的競爭對手雖然也有較大流道的板面設計，但其內部紊流的形式易造成阻塞。而我們特殊的自由流體設計，則可處理含有較大顆粒的流體而無須經常清理維修。
FREE-FLOW PLATES
| FREE-FLOW CONNECTIONS AND PRESSURES | ||
|---|---|---|
| MODEL | STUDDED PORT SIZE*(in.) | OPERATING PRESSURES+ |
| AT161FF | 3 | up to 86 psig (6.9 bar)(6kg/cm2) |
| AT40FF | 4 | up to 150 psig (11.3 bar)(10.5kg/cm2) |
| AT184FF | 8 | up to 86 psig (6.9 bar)(6kg/cm2) |
| AT192FF | 12 | up to 86 psig(6.9 bar)(6kg/cm2) |
| MATERIALS OF CONSTRUCTION | |
|---|---|
| PLATES | GASKETS |
| T304 stainless steel | Nitrile (NBR) |
| T316 stainless steel | Ethylene Propylene Rubber (EPDM) |
| Titanium | Silicone |
| Avesta SMO 254 | Viton |
| Hastelloy | Butyl (Resin Cured) |
| Nickel | Hypalon |
| Incoloy | |
* Standard studded port-type connections provide maximum cost effectiveness and are available from stock. Lap joint and weld-neck flanged connections are available at additional cost with longer delivery. + Temperatures up to 300℉(148.90℃) are available on all models.
