Brazed Plate Heat Exchanger
Installation Guide
內容文字
Brazed Plate Heat Exchanger INSTALLATION GUIDE
Install the Brazed Plate Heat Exchanger in counter flow direction: To keep lower water volume below the connector.
![](/photo/brazed-installation/a1.jpg)
Install the Brazed Plate Heat Exchanger in counter flow direction:To achieve high thermal efficiency and high heat transfer rate.
![](/photo/brazed-installation/a2.jpg)
Mounting suggestions : For different ways of mounting the Brazed Plate Heat Exchanger
![](/photo/brazed-installation/a3.jpg)
![](/photo/brazed-installation/a4.jpg)
![](/photo/brazed-installation/a5.jpg)
![](/photo/brazed-installation/a6.jpg)
Cleaning
- The solution used should be a weak acid solution with concentration less than 5%, citric acid for example.
- Should the acid concentration be too high, the copper and stainless steel inside could be etched or corroded.
- Flush the Brazed Plate Heat Exchanger with large amounts of fresh water before restarting the system in order to purge any remaining acid solution.